Christmas Stars

Christmas Stars

Happy Holidays my quilting divas!! Have I got a project for you!! It’s a no sew and great for keeping those grandkids busy! I’m calling them Christmas stars, but you could make them for all seasons or holidays. You can also light them up  with Christmas lights or with some ric rac or fishing line make them into ornaments. They are so versatile!

Materials:

IMG_0393

All you’ll need is a:

1. Charm pack – or if your using scraps a perfect square (5×5, 4×4, whatever size you want)

2. Scissors

3. Iron

4. Fusible interfacing – I used heavy Pellon, you’ll need 3/4 yard

5. Glue gun and glue sticks

Step 1:

IMG_0394

IMG_0395

Place the interfacing shiny side up and iron the entire charm pack down. It works best if you use a little steam.

Once they’re all ironed on, cut them apart. Get right next to the pinking.

Step 2:

Step 3

Grab one square and fold it diagonally with print side up. Set the fold with iron, remember to use steam. Repeat in the opposite direction.

You should now have two folds creating a X shape.

*It helps if you can let the fold cool each time before doing the next.

Step 3:

Step 4

Fold the charm with the print together and press it in half. Set the fold and repeat the other direction. You should now have a cross.

*It helps if you can let the fold cool each time before doing the next.

Step 4:

step 5

On the perpendicular folds, the ones that make a cross, cut less than half way. Do not cut the diagonals!

Step 5:

Step 6

Fold each corner over to the diagonal fold and set with the iron. Repeat for all four sides.

Step 6:

Step 7

This is what it should look from the back, upper left, and front, lower right.

Step 7:

IMG_0434

Time to plug in the glue gun!

step-7

Place a thin-ish line of glue ( look at the bright green line for guidance) on one triangle and fold the other half over of to the crease and press together. Repeat for all four sides.

Tip 1: Fold the point first before adding glue, this way you know which way it wants to fold (it make the points neater)

Tip 2: When your pressing, use a lobster pinch. Insert you pointer finger in the point and pinch with you thumb.

step-8

Here’s what you star should look like now.

Step 8:

IMG_0440

Once you have two made, put a dot of glue where the stars overlap. You should have four small dots (one for every point of one star).

If you making them into ornaments this is where you want to insert the ric rac, before you connect them.

Light it up!!

IMG_0445

The best part about these is if they squished just pull on the points and it will pop back!

Good Luck!

Kate